-
Giỏ hàng của bạn trống!
0 sản phẩm
0đ
Desoldering in an instant, with reduced solder residue! Combines desoldering gun and temperature-controlled soldering iron in one unit.
Two-stage trigger switch (PAT.P)
Step 1
Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber.
Step 2
Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber.
With open-valve mechanism
A wide range for terminals, connectors and flat ICs
To keep the temperature constant during desoldering
Reduces noise during heater ON/OFF
Makes changing the filter easy
Desoldering/Soldering time is approx. 2 seconds / 5×5mm land (with PX-2RT-B tip, TP-100N-10 nozzle)
The open-valve allows the device to reach vacuum pressure of -0.06MP (approx.-450mmHg) in only 0.1second. (about 4 times faster than our SVS-500AS).
The arrow indicates solder residue.
Soldering Iron Unit SVS-800AS, SVS-580AS, SVS-500AS
SPECIFICATIONS | |
Công suất | 110V,120-130V (200W), 220-240V (270-300W) |
Voltage | 110V,120-130V,220-240V AC 50/60Hz |
Nhiệt độ cài đặt | Deoldering Unit 250−450˚C, Soldering Unit 200−480˚C |
Accessories | Cleaning pin TP-100CP-13, Soldering iron stand ST-76 |